| |
Jig ÎÌGR-02-Ì
1. Destination.
The jig OMGR 02 M is destined for the processing by gravitation in the middle of water of the samples in the phases of the geological prospecting, detailed-evaluation and operational exploration of deposits of diamonds, as well as for the industrial exploration, research works and technical control in the Plants.
2. Engineering information.
ÎÌGR-02-Ì
| Model |
ÎÌGR-02-Ì |
| Type |
2 boxes,
diaphragms,
crank drive |
| The capacity of production is depending on the ore characteristics, and on the conditions of concentration of the heavy material, over the screen (oversize) or under the screen (undersize) [t/hour.] |
Up to 1.0 |
| Fraction size in treatment [mm.] |
-16(20) +0.5 |
Removable boxes are installed in a support with elastic gasket and fixed by the screws. In accordance with the fraction in treatment, in the boxes are installed the respective sieves.
Quanty of boxes, [un.] |
2 |
The frequency of diaphragms’ oscillation is controlled by frequency converser ÌÑ07À005-5À3-4-00, of SEW EURODRIVE production, (Germany),
[1/min.] |
0 - 355 |
| Oscillation amplitude is regulable, [mm.] |
0 -40 |
Drive coaxlal assincronous motor DT80ÒK/TF, of the SEW EURODRIVE production, (Germany), [un.]
- nominal power, [kVt.]
- turning moment on reducer exis,[Nm.]
- frequency of drive motor rotation, [1/min.]
- frequency of reducer exis rotation, [1/min.]
- nominal voltage , [V.]
- nominal current, [A.]
- frequency, [Hz.]
- reducer is connected to driving-axle by trapeziform belt, belt’s tiype (À), [un.]
- lubrication: synthetic oil to work in the temperature range, [C .] |
1
0.55
15
1360
355
230/400
1.75
501
-40 +40 |
| Size, [LxBxH], [mm.] |
952õ832õ1242 |
| Weight, [kg.] |
129 |
|
 «««««
|
|
|
